| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
| DN | DASH | A | C | S1 | S2 | ||
| 28611-12-04 | M12x1.5 | 6 | 04 | 20 | 9 | 17 | 17 |
| 28611-14-04W | M14x1.5 | 6 | 04 | 23 | 10.5 | 17 | 17 |
| 28611-14-06 | M14x1.5 | 10 | 06 | 21 | 10.5 | 19 | 19 |
| 28611-16-04 | M16x1.5 | 6 | 04 | 24 | 10 | 22 | 22 |
| 28611-16-05 | M16x1.5 | 8 | 05 | 24 | 10 | 22 | 22 |
| 28611-16-06 | M16x1.5 | 10 | 06 | 24 | 10 | 22 | 22 |
| 28611-18-06 | M18x1.5 | 10 | 06 | 24 | 11.5 | 24 | 24 |
| 28611-18-08 | M18x1.5 | 12 | 08 | 24.5 | 11.5 | 24 | 24 |
| 28611-20-08 | M20x1.5 | 12 | 08 | 28.5 | 12 | 27 | 27 |
| 28611-22-08 | M22x1.5 | 12 | 08 | 25.5 | 14 | 27 | 27 |
| 28611-24-08 | M24x1.5 | 12 | 08 | 27.5 | 15 | 32 | 32 |
| 28611-24-10 | M24x1.5 | 16 | 10 | 28 | 15 | 32 | 32 |
| 28611-30-12 | M30x1.5 | 20 | 12 | 28.5 | 18.3 | 36 | 36 |
| 28611-33-12 | M33x1.5 | 20 | 12 | 31 | 21.3 | 41 | 41 |
| 28611-33-16 | 33x1.5 | 25 | 16 | 32 | 21.3 | 41 | 41 |
| 28611-36-20 | M36x1.5 | 32 | 20 | 35.5 | 20 | 46 | 46 |
| 28611-42-24w | M42x1.5 | 40 | 24 | 40 | 18.8 | 55 | 55 |
| Note:1. For use with braided hoses; 2.If use with spiralhoses, hose fitting series number is 28612-xx-xx. | |||||||
'U' Series
Male DIN 24˚ Seat (Light)
Male DIN 24˚ Seat (Heavy)
Male Pipe Swivel
FOR-SEAL Male Rigid
JIC/37° Male Rigid
SAE 45° Female Swivel
Inverted Male Swivel Straight
Flareless Tube Rigid Ermeto 7000 Series
Male Straight Thread O-ring Swivel
Male Straight Thread O-ring Rigid
Female Grease Tap
Female Pipe Rigid
Female Pipe Swivel
JIC/37° Female Swivel
Female Straight Pipe Swivel (NPSM)
SAE 45° Female Swivel
Female Swivel DIN Universal Seat (Light)
Female Swivel DIN 24° Seat (Heavy)
Female Swivel 30° Flare
British Standard (BSPP) 60° Cone Female Pipe Swivel
Female JIS 30° Flare Parallel Pipe Swivel
Female FOR-SEAL Swivel Straight
BSPP Flat Face Female Swivel
READY-LOK Male Connector
Split Flange Straight (SAE Code 61)
Metric Split Flange Straight (Komatsu, Linkbelt, etc.)
Banjo
Metric Standpipe Straight Tube
Standpipe Straight Tube
SAE 37° Female Swivel 30° Tube Elbow
Inverted Male Swivel 45° Tube Elbow
SAE 37° Female Swivel 45° Tube Elbow
Female Swivel DIN Universal Seat 45˚ Tube Elbow
Flareless 45° Tube Elbow 7000 Ermeto Series
JIC 37° Female Swivel 45° Tube Elbow
Male Swivel 45° Tube Elbow O-ring Port
Split Flange 45° Tube Elbow (SAE Code 61)
British Standard (BSPP) 60° Cone Female 45° Tube Elbow
Female FOR-SEAL Swivel 45° Tube Elbow
Metric Split Flange 45° Tube Elbow (Komatsu, Linkbelt, etc.)
Inverted Male Swivel 90˚ Tube Elbow
SAE 37° Male Rigid 90° Elbow
Male Pipe Swivel 90° Elbow
JIC/37° Female Swivel 90° Long Drop Tube Elbow
SAE 45° Female Swivel Long Drop 90° Tube Elbow
Flareless 90° Tube Elbow 7000 Ermeto Series
JIC/37° Female Swivel 90° Tube Elbow
Female Swivel DIN Universal Seat 90° Tube Elbow (Light)
Female Swivel DIN 24° Seat 90˚ Tube Elbow
British Standard (BSPP) 60° Cone Female Pipe Swivel 90° Tube Elbow
Female FOR-SEAL Swivel Short Drop 90° Elbow
Female FOR-SEAL Swivel Medium Drop 90° Tube Elbow
JIC 37˚ Female Swivel 90˚ Elbow
Male Straight Thread O-ring Swivel 90° Elbow
Female FOR-SEAL Swivel Long Drop 90° Tube Elbow
Split Flange 90° Tube Elbow (SAE Code 61)
Design and Construction
Forging and maching process for shaped products of elbows, tees and crosses, while cold drawn barstock is for the staights.
Most of our Connector products are made of carbon steel, brass, but also they can made of stainless steel or other material under the drawing of customers.
Finish
Zinc plating with silver chromate (zinc chromium 6 free) is used on all standard steel products. Stainless steel fittings are passivated.
Zinc and Nickel plating, electroless Nickel plating are also alternative option.
High Quality Standards
As an ISO 9001 certificated manufactory, we ensure that our design and manufacturing processes are the highest quality by maintaining proper certification and in-house inspections.
Under the requirement of ISO, we have a rotating gage calibration schedule to make sure the dimensions of each fitting component is 100% accurate based on specified measurements.
We have a professional quality inspection team. Individually trained employees control the manufacturing process with strict statistical analysis and control. We can ensure that each identical fitting component you order is true to the design specifications.
Packaging and Shipping
All Huayan orders are packaged in-house by our employees in strong cartons wrapped in protective caps. All packages are clearly labeled with text and bar information. Then we will put boxes into an wooden case with a big plastic bags.
As usually we delivery order 45-60 days after the order. Customers may also inquire about our Just-In-Time manufacturing process or expedited manufacture and shipping for products needed within 24 hours.
Customer Service
Our website will also help guide you through the various metal types of hydraulic fittings and more. Provide us with a faxed or email sketch of your required hydraulic fitting components along with the desired quantity and we will be able to give you a quote within 24 hours.
Thank you for visiting Hua Yan Hydraulics!
